We wanted to let you know that we recently discovered a weakness in our manufacturing models Kruyer, nothing serious but it must still monitor the aging of the harness:

If in case of detection of this wear by one of your customers, The first step is to send us a photo for a simple visual check.

The problem is found at this level:

Shoulder straps slide on a metal frame to go from sitting to standing position easily. Sometimes the metal frame in which the shoulder straps slide gets stuck at the top of the seam.

It follows a premature wear of the thigh strap:

Please carefully check the status of the strap above the stitching at the location pointed to by the red arrow. If abnormal wear is found, please take a photo of the damaged area and Cette adresse email est protégée contre les robots des spammeurs, vous devez activer Javascript pour la voir. >contact us to take action .

For breach of this belt, there is no risk of falling from the spot, but the position may be downright uncomfortable.

Remember that a control harness every 2 years is recommended .

Harnesses in stock have been modified accordingly. There is a simple way to identify them: the sewing of the shoulder strap on the leg strap is made of yellow wire.